Sodium Hydroxide, 5% Solution
Product Specification
Description

This JCI product is a water solution of sodium hydroxide. Ingredients include water, caustic soda and trace metallic and inorganic salt compounds. Inorganic salt and sodium compound data are representative of 50% sodium hydroxide.

This specification is based on mathematical calculation and supplier information. JCI does not make any expressed or implied warranty that all future production will demonstrate or continue to possess these properties.
Specification

Specification
Sodium Hydroxide (Equiv.) NaOH 5.0% wt.
Sodium Oxide (Equiv.) Na2O 3.0% wt.
Specific Gravity @ 60oF (15.6oC) 1 1.056
Sodium Carbonate Na2CO3 0.30% max.
Sodium Chloride NaCl 1.30% max.
Sodium Sulfate Na2SO4 0.20% max.
Sodium Chlorate NaClO3 0.50% max.

Inorganic Salts

 1 0
    Silicon
Si 100 ppm max.
    Iron
Fe 10.0 ppm max.
    Manganese
Mn 1.0 ppm max.
    Copper
Cu 2.0 ppm max.
    Nickel
Ni
 3.0 ppm max.
For Chemical Emergency Spill, Leak, Fire, Exposure or Accident,
Call CHEMTREC, Day/Night at 800.424.9300.

Always read and follow the product label and Material Safety Date Sheet (MSDS) that are shipped with each order.

The information presented herein is based on data considered to be accurate and that reflects the requirements of the OSHA Hazard Communication Standards in effect as of the date of preparation of this Product Specification Sheet. However, no warranty or representation, express or implied, is made as to the accuracy or completeness of the foregoing data and safety information. In addition, no responsibility can be assumed by vendor for any damage or injury resulting from abnormal use, from any failure to adhere to recommended practices or from any hazards inherent in the nature of the product.

© 2001. JCI Jones Chemicals, Inc. All Rights Reserved.