Fluorosilicic Acid (Hydrofluorosilicic Acid)
Product Specification

Chemical Analysis

	Guaranteed	Typical
Assay (H2SiF6)	23.00% min	24.0% ± 2%
Fluorine (F)	18.22% min	1 19.0% ± 1.5%
Heavy Matals as Lead (Pb)	0.02% maxx	0.0002%
Hydrofluoric Acid (HF)	Less than 1.00%	nil

Physical Properties

Description	Water white to straw yellow solution, meeting both the AWWA Standard B703a-97 and the NSF/ANSI Standard 60 for Fluorosilicic Acid.
Color	Straw Yellow shall be determined as material with a maximum of 100 units (APHA) in accordance with method 2120B, visual comparison method.
Specific Gravity	1.234 (H2O = 1) for 25% @ 60oF
Boiling Point for 25%	222.5oF
Freezing Point for 25%	4oF (-15.5oC)
Molecular Weight	144.08
Weight per Gallon for 25%	10.29 lbs./gal

Containers

Bulk Rail Cars	100 tons net weight (approximate)
Bulk Tank Trucks	20-25 tons net weight (approximate)
Drums	approx. net weight 550 lbs.
Deldrums	approx. net weight 155 lbs.

Freight Description

DOT Shipping Classification	Class 8 (Corrosive)
DOT Shipping Name	Fluorosilicic Acid
UN 1778	Placard: Corrosive
Packing Group II

For Chemical Emergency Spill, Leak, Fire, Exposure or Accident,
Call CHEMTREC, Day/Night at 800.424.9300.

Always read and follow the product label and Material Safety Date Sheet (MSDS) that are shipped with each order.

The information presented herein is based on data considered to be accurate and that reflects the requirements of the OSHA Hazard Communication Standards in effect as of the date of preparation of this Product Specification Sheet. However, no warranty or representation, express or implied, is made as to the accuracy or completeness of the foregoing data and safety information. In addition, no responsibility can be assumed by vendor for any damage or injury resulting from abnormal use, from any failure to adhere to recommended practices or from any hazards inherent in the nature of the product.

© 2001. JCI Jones Chemicals, Inc. All Rights Reserved.