Activated Carbon
Product Specification
Description

Powdered Activated Carbon meets A.W.W.A. Standard B-600-78, for treatment of potable drinking water and is totally compatible with all municipal water treatment use and application systems. A representative sales specification is shown below:
Specification
Phenol Value (ppm)
 16 ± 2
Modified Phenol Value (g/1)
 1.59 - 2.05
Density, (#/cu. ft.)
 28 - 32
Density (g/ml)
 .45 - .51
Iodine Number, Min, (Mg/g)
 650
Moisture, % Max. (when shipped)
 5%
Acid Insoluble Ash, % Max
 1.5%
Fineness, U.S. Sieve Series
 0
Thru 100 Mesh, % Min. 99%
Thru 200 Mesh, % Min 95%
Thru 325 Mesh, % Min 90%
Bag Specifications
 0
Weight 50 lbs.
Size 24" X 32" X 7"
Construction Alternative 1 -5 ply
0 Alternative 2 - 6 ply
Product is shipped in 50lb. bags either loose, or on pallets with poly stretch wrap. It is also available in bulk, by railcars or pneumatic trucks or bulk bags of approximately 900 pounds.

For Chemical Emergency Spill, Leak, Fire, Exposure or Accident,
Call CHEMTREC, Day/Night at 800.424.9300.

Always read and follow the product label and Material Safety Date Sheet (MSDS) that are shipped with each order.

The information presented herein is based on data considered to be accurate and that reflects the requirements of the OSHA Hazard Communication Standards in effect as of the date of preparation of this Product Specification Sheet. However, no warranty or representation, express or implied, is made as to the accuracy or completeness of the foregoing data and safety information. In addition, no responsibility can be assumed by vendor for any damage or injury resulting from abnormal use, from any failure to adhere to recommended practices or from any hazards inherent in the nature of the product.

© 2001. JCI Jones Chemicals, Inc. All Rights Reserved.